Basic Salt Spray and Cyclic Corrosion Test Chambers.
Modernized design with competitive pricing.
User – friendly loading thresholds.
Features
Inbuilt Large capacity brine solution (salt solution) tank.
Bubbling Tower / Saturator tank with built in automatic water level controller.
Highly précised atomizer to generate uniform fog.
Pneumatic door lift.
.
CM Envirosystems (India)
Humidity Chambers
The Nano Bench top chambers are compact sized humidity chambers which can be placed on a work bench or on the optional stand provided. These chambers are small, light weight and low audible noise which are ideal for confined work spaces.
Features
Portable models for easy handling and installation
Space-saving smaller foot-prints suitable for desktop operations
Ideal for laboratory conditions with extremely lower noise levels < 55 db
Capable to perform all operations similar to larger chambers
Eurotherm Controller with optional RS 232 / 485 communication port
Adjustable tray provision and standard access ports
Safety devices for temperature, excess pressure, overload, low water level protections.
.
CM Envirosystems (India)
HALT & HASS Chambers
The Time Compression Systems from HALT&HASS Systems Corporation are state-of-the-art equipment for simultaneously stimulating products with all axis broadband vibration and high-rate, broad-range thermal cycling.
Time compressions Systems have the highest performance in the industry:
o Temperature ramp rates of +/-120°C/minute, higher available upon order. The highest in the industry.
o Vibration will start and run from 0.1 to 150 GRMS.
o X,y,z balance is near 1:1:1.
o Sound level is only 50 dBA at 30 GRMS, the lowest in the industry.
o Will operate on 110 volts, 50-60 Hz with reduced heating for trouble shooting.
.
CM Envirosystems (India)
Dust Chambers
Aerial BIS Range is designed for the simulation of Dust in a controlled atmosphere in accordance to IS:9000 standards. Aerial IEC Range is designed for the simulation of Dust in a controlled atmosphere in accordance to IEC-600529 DIN-40050 IP5X & IP6X, SAE-J575, ISO-20653 and IEC-60068-2-68 standards.
These equipments are mainly used for evaluating the effects of dust-laden environments. Comprises of a unique and yet simple design with uniform dust circulation.
Features
Interior test space made of Non-magnetic Stainless steel with dust collection section below the test pace
Stainless steel mesh shelves - to Provide a Platform to place your components and to let free flow of dust.
Floating dust agitation with air velocity control by speed adjustable blower and motor
Aerial current agitation with variable rpm blower motor and filtration of dust at sucking sections
Viewing window with extruder rubber wiper with rotating handle
Dust measuring devices as per standards
Ingress protection test (optional)
.
CM Envirosystems (India)
Rain Chambers
AQUA – Rain Chambers Designed for the simulation of Rain/Water Spray as per IEC-60529, IS-9000 Part XVI-1983 and JIS-D 0203-1976 with features like fully Non-corrosive interior and exterior. Characteristic water flow patterns as per IPX1 – IPX4 and R1, R2, S1 & S2 standards.
AQUA – Design and Construction
Exterior with non-corrosive FRP (Fiber Reinforced Plastic).
Interior with non-corrosive FRP (Fiber Reinforced Plastic) / stainless steel.
Large capacity (100 Ltrs) water reservoir with automatic water refilling facility.
Rotating test table to expose the specimen for spray from all sides.
Rotating spray and rain nozzle arms are designed for JIS specification.
The chamber is also designed for multiple tests as per different standards
Designed for re-circulation of water for continuous tests.
Required pressure regulators, flow meters & guages for pressure and flow control of sprays.
.
CM Envirosystems (India)
Thermal Shock Chambers
The extreme simulation of temperature is conducted in two zones of hot and cold that can be controlled independently and an optional third zone. The single basket product carrier moves vertically, from one zone to the other, subjecting the product to dramatic changes in temperature thus creating a temperature shock and thereby detecting specimen flaws.
Features
Vertical movement of basket with separate hot and cold temperature zones.
The Basket transition done through a Robust Electro-pneumatic Method.
Mono-block design with integrated Non-CFC cascade refrigeration system.
enviCoM - Color Touch Screen Controller.
Castor wheels for easy movement of the chamber
.
CM Envirosystems (India)
Climatic Chambers
Uniquely designed to suit any ergonomic conditions
Integral Mono-block construction for easy handling
Available in stock to meet the just-in-time testing needs of industries
Elegant resistive analog color touch screen controller
Web – Enabled Graphic Operator Interface.
Remote monitoring and operation.
The most on-board communication ports.
Internet explorer based communication.
Built-in Ethernet.
Features of PAC series
An elegant module with maintenance-friendly access to all sections.
Eco-friendly highly efficient non-CFC refrigeration system with safety protected devices.
Direct vaporization humidification system with low-pressure vapor boiler.
Refrigeration based de-humidification.
Fully vacuumised multipane window for condensate free view of specimen.
Adjustable and removable shelving.
Mounted on heavy – duty castor wheels.
.
CM Envirosystems (India)
Altitud Chambers
Altiplus - Altitude Test Chambers are specially designed for the testing of avionics aerospace and products which are exposed to high altitude conditions. These simulators operate in a wide range of Temperature Altitude with user programmable rate of ascend and descend. Optional models are available with humidity to perform the CATH Combined Altitude Temperature & Humidity cycle.
CM Envirosystems Altitude Test chambers are designed for simulating the actual conditions of high altitude to test various components, which may undergo low-pressure conditions especially in the avionics or aerospace industries
Features
Temperature ranging from -70 deg C to 180 deg C with optional humidity.
Altitude range up to 1 m bar.
Touch screen controller with facilities of remote monitoring and operation, Internet Explorer based communication; Web enabled Graphic Operator Interface, On-board communications and Built-in Ethernet.
Square threaded durable locking arrangement for easy opening of door.
Vacuum-sealed imported Teflon feed-thro flanges will be provided for energizing the specimen during testing for variable power capacities.
Vacuum sealed window with cyclic de-fog heaters
.
CM Envirosystems (India)
Dry Heat Chambers
Designed for the simulation of Extreme heat in particular for longevity, ageing, Burn-in and accelerated stability tests in R & D, Quality testing and Process control laboratories worldwide.
Features
Robust Design and Durable for Long Usage.
Auto Tune PID Controller for Precise Setting of required Temperature.
Rigidly Mounted Door with Easy Locking Facility.
Door Limit Switch for User Safety. Laminar Air Flow for Uniformity of air distribution throughout the workspace.
The Time Compression Systems from HALT&HASS Systems Corporation are state-of-the-art equipment for simultaneously stimulating products with all axis broadband vibration and high-rate, broad-range thermal cycling.
Aerial BIS Range is designed for the simulation of Dust in a controlled atmosphere in accordance to IS:9000 standards. Aerial IEC Range is designed for the simulation of Dust in a controlled atmosphere in accordance to IEC-600529 DIN-40050 IP5X & IP6X, SAE-J575, ISO-20653 and IEC-60068-2-68 standards.
Altiplus -
Designed for the simulation of Extreme heat in particular for longevity, ageing, Burn-in and accelerated stability tests in R & D, Quality testing and Process control laboratories worldwide.