Force Gauges

Tecnología de Punta en Equipos de Control de Calidad

JFMSELECT

EnglishEspañol

Force Gauges

Physical Test Solutions

SH Series Digita Push Pull Gauge

The SH series combines a stylish design with maximum flexibility and high accuracy.

Features:

High accuracy and high resolution. The SH series offers +0.5% FS accuracy, and high resolution. That is illustrated by the 50N device which indicates a minimum of 0.01N, which is 1/5000 resolution.

l Peak hold

l Peak hold selection feature. Peak hold is cleaned automatically in pre-selected time spans from 1 to 10 seconds

l Auto power off. For convenience of battery savings, the unit will power off in a programmable time frame ranging from 1-60 minutes when the unit not in operation.

l Programmable set points. Upper and lower limits can be set for go no-go applications. The unit has light and sound signals.

l The unit has a 1 Hz data rate and calculates the average of memory data

l Unit readings. High versatility and convenience, the unit provides readings in lbf. kgf. and Newton. The units are push-button selectable.

l An RS-232 series port in included for connection to a printer or computer. The printer prints the following data: maximum value, minimum value, average value, desired value and undesired value

digitalgaige-640

digitalgauge2-640

Specifications:

Model

SH-2

SH-5

SH-10

SH-20

SH-50

SH-100

SH-200

SH-500

Capacity

2N

5N

10N

20N

50N

100N

200N

500N

Minimum load

0.001N

0.001N

0.005N

0.01N

0.01N

0.05N

0.1N

0.1N

Sensor

                   SENSOR INSIDE

Accuracy

                         ±0.5%

   Model

SH-1k

SH-2k

SH-5k

SH-10k

SH-20k

SH-50k

SH-100k

SH-200k

SH-500k

SH-1000k

   Capacity

1k

2k

5k

10k

20k

50k

100k

200k

500k

1000k

   Minimum   l   load

0.5N

1N

1N

0.005KN

0.01KN

0.01KN

0.05KN

0.1KN

0.1KN

0.5KN

   Sensor

              EXTERNAL SENSOR (“S” Type)

External Sensor (cylinder)

   Accuracy

              ±0.5%

       ±1%

Physical Test Solutions

SN and SKN Series Analoge Push Pull Gauge

The SH unit comes in a practical plastic case.

The SN series is an attractive line of push pull gauges with compact size and high accuracy. They are easy to operate and handy to carry out. A single click on a knob will convert the movement of the indication needle from the peak force (the needle stands still indicating peak force), to the real time indication (the needle moves in accordance with change of force). The devise is available in two of scales; Newton scale and kilogram scale. The SN series is available in capacities from 10N (1kgf) to 500N (50kgf).

Features:

Ø Ease of operation can be installed in a variety of test stands and fixtures.

Ø Peak hold function and real time readout.

Ø Multiple applications such as in electronics, wire, cable harness, light textile, and mechanical applications.

sn1-640 sn2-640

Model	SN-10	SN-20	SN-30	SN-50	SN-100	SN-200	SN-300	SN-500
Capacity	10N	20N	30N	50N	100N	200N	300N	500N
Minimum load	0.05N	0.1N	0.2N	0.2N	0.5N	1.0N	2.0N	2.0N
Accuracy	±1%

skn1-640 skn2-640

Model	SKN-1	SKN-2	SKN-3	SKN-5
Capacity	1000N	2000N	3000N	5000N
Minimum load	5N	10N	20N	25N
Accuracy	±2%

Physical Test Solutions

SLR Manual Wheel Test Stand

The SLR test stand has a variety of applications, such as switch tests, insertion/withdrawing tests, and fracture tests. The motive carrier is designed with the test stand and can be moved on X-Y axis. The design is convenient to fix grips.

Specifications:

Þ Stable base, hand wheel overload and easy operation

Þ Dimensions: 250x360x470 mm (L x W x H)

Þ Capacity: 500N

Þ Stroke: 180mm

Accommodates: SN, SH series force gauges, grips, digital scale

SLK / SLJ Manual Wheel Test Stands

The SLK and SLJ manual wheel test stands are popular in every trade and scientific research organization for testing applications tension/compression tests, insertion/withdraw tests and fracture tests.

Specifications:

Þ T-screw transfer displacement for manual operation in vertical or horizontal use.

Þ Dimensions: 160x240x460 mm (L x W x H)

Þ Capacity: 500N

Þ Stroke: 150mm

Þ Accommodates: SN, SKN series force gauges, grips, digital scale.

SLS Peel Force test Stand

Model is specially designed for testing cling force of copper-foil circuit on PC board and adhesive intensity of silver paper, aluminum foil and rubberized fabric. It uses a trapezoid form screw drive, holistic nut design with a 45 degree lift between the plane and level, which makes sure the object moves while it is tested.

Specifications:

ü Dimension: 350x210x460 mm (L x W x H)

ü Capacity: 500N;

ü Stroke: 150mm

ü Accommodates: SN, SH series push pull force gauges, with various clamps.

SPJ Manula Test Stands

This series of test stands features a gear drive manual operation for easy of use and rapid load applications. Its simplicity makes it ideal for batch tests.

Specifications:

v Dimension:240x150x400 mm L x W x H

v Capacity: 500N

v Stroke:70mm

v Accommodates: SN, SH series push pull gauges, clamps.

SPH Horizontal Manual Test Stands

This series of test stands features a gear drive manual operation for easy of use and rapid load applications and offers the advantage of horizontal operation.

Specifications:

v Dimension:450x150x160 mm L x W x H

v Capacity: 500N

v Stroke:50mm

v Accommodates: SN, SH series push pull gauges, clamps.

sph-640

sphsh-640

SJH-500 Series of Horizontal Motorized Test Stands

The SJH-500 series of horizontal motorized test stands operate with force gauges in the range of 2 to 500N. The stands have a double leader design for added stability and reliability. The units have a timing switch as well as manual and automatic control switch functions.

Specifications:

Þ Dimensions: 570 X200X330 mm (LxWxH)

Þ Capacity 500N

Þ Stroke 250 mm

Þ Accommodates: SN, SH series push pull gauges, clamps

sjhsn-640

sjhsh-640

SJV-5K and 10K Series of Motorized Test Stands

The SJV series are motorized vertical test stands which are used in tension and compression tests. The SJV series comes in three versions to accommodate SKN series analogue pull push gauges and SH series digital pull push gauge with different adapters and with internal or external sensor. The stand features a dual column design which affords high stability and reliable force application and measurement. The SJV stand features variable speed control, and jog buttons to position the crosshead for test initiation.

Specifications:

Ø Speed range: 30 – 230 mm/min

Ø Speed accuracy: 0.5 %

Ø Vertical travel: 200 mm

Ø Clearance between columns: 250 mm

Ø Capacity: 5-10KN

sjv5k-640

sjv10k-640

SPV Manual Hydraulic Test Stands

The SPV test stands can be used in conjunction with the series SH force gauges. The test stands use a hydraulic jack to apply force, and have a design that allows forces to be applied in tension or compression.

Specifications:

v Capacity: 50KN to 200KN with SH series force gauge.

v Stroke: 150 mm

v Dimensions: 260 X 470 X 1290 mm (LxWxH)

SOV Test Stand

Characteristic:

Þ Large Travel

Þ Cycle Testing With Counter

Þ Measure in Constant Speed and Nonpolar

Þ Ruler for displacement measurement.

Specification:

Test Range: 2000N

Measuring Stroke: 800mm

Measuring Speed: 20-500mm/min

Working Voltage: Single-Phase 220V

Rate Flow: 1.5A

Fuse of Main Circuit: 0.5A

Working Temperature: 20 ±10°C

Store & Delivery Temperature: -27°C ~ +70°C

Relative Humidity: 15% ~ 80% RH

SBJ Fastener Pull Test Stand

SBJ Fastener Pull Test stand apply with SN.SII series force gauge and special grips, is specially used to measure the bottom of the ready-made clothes and the purpose of the test is to define the responsibility of the ready-made clothes manufactures to make sure that the buttons and fixed decorative pieces are properly fixed on the clothes, this way preventing the buttons from falling. Push Pull Force Gauge and various clamps are optional.

Physical Test Solutions

Bottle Cap Torque Gauges

The ST-B series of Cap Torque Tester is an intelligent measuring instrument designed for detecting and calibrating the torque torsion and closure of various types of caps used by closure manufacturers, bottlers, food and beverage companies, and for other applications. The cap torque tester has clamps that provide positive gripping action for a variety bottles, jars and containers. The maximum clamp diameter is 200 mm and installation is fast and easy. The ST-B series of Cap Torque Tester include a convenient built-in printer and an RS-232C port to transmit data to a computer for analysis, storage and print-out.

Features:

l High Accuracy, High Resolution

l Automatic alarm

l Compared Function

l Peak Hold and Auto-release Function

l Memory 10 Values, Calculates the Average Value Function

l Provides readings in: Ncm, kgfmm, lbf.in

l Outputs: RS-232, Digimatic analog

Models and Capacities

Model	ST-1B	ST-2B	ST-5B	ST-10B	ST-20B
Capacity	1N.m	2N.m	5N.m	10N.m	20N.m
Minimum load	0.0005N.m	0.001N.m	0.002N.m	0.005N.m	0.01N.m
Accuracy	±0.5%

bottlecaptorque

Physical Test Solutions

Tool Torque Gauges

ST Series

The ST series of digital torque gauges are intelligent instruments designed for various torque testing and measuring applications. The units are used for calibrating electric screwdrivers and wrenches with torque control to measure relative torque testing and torsion fracture parts testing. The units are used in the electric industry, hand tool industry and in research laboratories.

Features and Specifications:

ü Peak hold function

ü Automatic power off

ü Go No-go function allows initial input of tolerance limits (minimum, maximum), and displays green light for parts within tolerance and red light for parts out of tolerance.

ü Memory for 10 measurements with average calculation function.

ü Unit conversion, converts from N/m to Kgf/cm, lbf, automatically.

ü RS 232 port for connection to printer or computer.

ü Has software for data acquisition.

ü ST 50-500 has printer on system

st1-640

Preview

Model:	ST-1	ST-2	ST-5	ST-10	ST-20	ST-50	ST-100	ST-200	ST-500
Torque capacity:	1N,m	2N,m	5N,m	10N,m	20N,m	50N,m	100N,m	100N,m	500N,m
Resolution:	0.005N,m	0.001N,m	0.002N,m	0.005N,m	0.01N,m	0.02N.m	0.05N,m	0.1N,m	0.2N,m
Accuracy:	+-0.5%					+-1%

SDT Series

SDT series is a special machine to test various form of torsion spring, scrollwork reed and other elastic objects. Being accurate and ocular for reading, the torsion and angle are displayed in a digital display. Also the torsion sensor deformation and twisting angle have automatic compensation function.

Features:

Þ 320 x 240 picture element Liquid Crystal Display (LCD)

Þ Peak holding and auto-releasing function

Catching and holding the peak value, showing it on display for (1-99 seconds), then releasing the value and being ready for the next peak

Þ Automatic power off function

This function saves battery and keeps the gauge safe; also the power off timer (1-99 minutes) can be set by the user.

Þ Comparing function

Initial input of the tolerance limit (Max/Min) enables the device to judge the measured result as Good (Green pilot lamp)/ No-Good (Red pilot lamp)

Þ Units conversion

Conversion in three units (N/m, kgf/cm, ibf/in) automatically

Þ Inside Printer

Printing test curve and analysis report of 10 groups of tested data

Þ RS-232C Output

RS-232C output connects outer equipment and can use the related CD for transmitting the tested data to a computer for relevant treatment

Parameter

Model:	SDT-0.2	SDT-0.5	SDT-1	SDT-2	SDT-5	SDT-10	STD-20	SDT-50
Capacity:	200N.mm	500N.mm	1000N.mm	2000N.mm	5000N.mm	10N.mm	20N.mm	50N.mm
Resolution:	0.02N.mm	0.05N.mm	0.1N.mm	0.2N.mm	0.5N.mm	0.001N.mm	0.002N.mm	0.005N.mm
Test Range of Angle:	0~-9999.9°
Angle resolution:	0.1°
Loading mode:	Handing
Specimen Rotary Diameter:	100 mm
Specimen Length:	150 mm
Out-size:	L 690 * W 390 * H 320 (mm)
Power:	220 ┴ 10%V 100W
Accuracy:	± 1%

Physical Test Solutions

Spring Test Machines

SD Series of Digital Spring Tester is specially R & D instruments, which is widely used in measuring load & distortion. It is adapted in test tensile and compressive spring, stretch components and also can be applied in the test of plastic reed.

Specifications:

Þ Peak hold function

Catch and hold the peak value in test.

Þ Peak hold and auto-release function

Catch the peak value and show it on display, keeping the value for 1-10 seconds, then release the value and ready for the next peak.

Þ Automatic power off

The SH Series have automatic power off function to save battery and keep the gauge Safe. The Power off timer can be set to 1-60 minutes.

Þ Compare function

Initial input of the tolerance limit (max/min) enables the device to judge the measured result as GO(green pilot lamp)/NG(red pilot lamp)

Þ Calculate the average function

Memory 10 groups of data, and calculate the average.

Þ Three units

lbg, kgp, and Newton units are push-button selectable.

Þ RS-232C output

The RS-232 output, offer the communication connector.

Þ Printer inside

Print 10 groups of data conserved in the test and the max value, the min value, the average value, the eligible value, the incompetent value.

sd-50-640 sd-1000-640

Model:	SD-10	SD-20	SD-50	SD-100	SD-200	SD-500	SD-1000	SD-2000	SD-5000
Max working load:	10N	20N	50N	100N	200N	500N	1000N	2000N	5000N
Load resolution ep:	.001N	.002N	0.01N	0.02N	0.05N	0.1N	0.2N	0.5N	1N
Test Travel:	70mm	70mm	100mm	100mm	100mm	100mm	150mm	150mm	150mm
Distortion resolution eh:	0.01mm	0.01mm	0.01mm	0.01mm	0.01mm	0.01mm	0.01mm	0.01mm	0.01mm
Platen Diameter:	34mm	34mm	49mm	49mm	49mm	49mm	108mm	108mm	108mm
Max free test table length:	70mm	70mm	150mm	150mm	150mm	150mm	200mm	200mm	200mm
Accuracy:	+/- 1%

Acatempan No. 2112, Col. Chapultepec Country
Guadalajara, Jal., México CP 44620
Tel. (01 33) 38-17-01-40