|
Physical Test Solutions (PTS) has a comprehensive range of grips, compression plates, bend fixtures, shear fixtures, extensometers and miscellaneous accessories designed to for use with universal testing machines.
The WG series wedge grips are designed to provide positive grip action with hand wheel to avoid slippage during tests. The WG grips accommodate flat and Vee type inserts for testing flat and round samples.
| WG-5KN |
Wedge Grip, 5KN Capacity |
| WG-20KN |
Wedge Grip, 20KN Capacity |
| WG-30KN |
Wedge Grip, 30KN Capacity |
| WG-50KN |
Wedge Grip, 50KN Capacity |
| WG-100KN |
Wedge Grip, 100KN Capacity |
| WG-200KN |
Wedge Grip, 200KN Capacity |
| WG-300KN |
Wedge Grip, 300KN Capacity
|
| WG-5KN |
Wedge Grip, 5KN Capacity |
| WG-20KN |
Wedge Grip, 20KN Capacity |
| WG-30KN |
Wedge Grip, 30KN Capacity |
| WG-50KN |
Wedge Grip, 50KN Capacity |
| WG-100KN |
Wedge Grip, 100KN Capacity |
| WG-200KN |
Wedge Grip, 200KN Capacity |
| WG-300KN |
Wedge Grip, 300KN Capacity
|
|
LWG Series Lever Wedge Grips
|
The LWG Series lever wedge grips offer practical and easy gripping action for rapid testing applications. In addition to its ease of use, the LWG grips are affordably priced. The LWG series of grips come in the same capacities as the SG series of grips.
| LWG-2 KN |
Lever Wedge Grips 2.5 KN Capacity
|
| LWG-5 KN |
Lever Wedge Grips 5 KN Capacity
|
| LWG-20 KN |
Lever Wedge Grips 20 KN Capacity
|
| LWG-50 KN |
Lever Wedge Grips 50 KN Capacity
|
| LWG-100 KN |
Lever Wedge Grips 100 KN Capacity
|
| LWG-200 KN |
Lever Wedge Grips 200 KN Capacity
|
| LWG-300 KN |
Lever Wedge Grips 300 KN Capacity
|
|
SAG Series Screw Action Grips
|
The SAG series screw action grips are suitable for small and thin materials used in low capacity testing applications. Capacities range from 1 KN to 50KN. For added convenience in elastomeric applications, pneumatic grips, PASG are also available.
|
SAG-125 N
|
Screw Action Grip 125N (includes inserts) |
| SAG-150 N |
Screw Action Grip 150N (includes inserts) |
| SAGE-500 N |
Screw Action Grip 500N (includes inserts) |
| SAGE-1 KN |
Screw Action Grip 1KN (includes inserts) |
| SAG-1 KN |
Screw Action Grip 1KN (includes inserts) |
| SAGE-5 KN |
Screw Action Grip 5KN (includes inserts) |
| SAG-5 KN |
Screw Action Grip 5KN (includes inserts) |
| SAGP-5 KN |
Screw Action Grip 5KN (includes inserts) |
| SAGT-5 KN |
Screw Action Grip 5KN (includes inserts) |
| SAG-10 KN |
Screw Action Grip 10KN (includes inserts) |
| SAGP-10 KN |
Screw Action Grip 10KN (includes inserts) |
|
SAG-20 KN
|
Screw Action Grip 20KN (includes inserts) |
| SAGP-20 KN |
Screw Action Grip 20KN (includes inserts) |
| SAG-50 KN |
Screw Action Grip 50KN (includes inserts) |
| PSAG-5 KN |
Screw Action Grip 5KN (includes inserts) |
|
STG Series Self Tightening Grips
|
| STG-1KN |
Self Tightening Grips 1KN |
| STGW-1KN |
Self Tightening Grips 1KN Wide |
| STBG -1KN |
Self Tightening Bollard Grips 1KN |
| STRG-1KN |
Self Tightening Rubber Grips 1KN |
| STTG-1KN |
Self Tightening Textile Grips 1KN |
| STRGW-1KN |
Self Tightening Rubber Grips WIde1KN |
| STG-2KN |
Self Tightening Grips 1KN Wide |
| STRGW-5KN |
Self Tightening Rubber Grips Wide 5KN |
| STSG-10 KN |
Self Tightening Scissor Grips 10KN |
|
PG Series Pneumatic Grips
|
The PG series is a stylish of pneumatic grips which are typically used for lower capacity testing applications that require convenient pneumatic force.
|
PFG Series Pneumatic Grips
|
The PFG series of pneumatic film grips is specifically designed for testing applications of film, aluminum foil, copper foil and paper. The grips include pneumatic pump and control valve for easy operation and high reliability.
| Model |
Capacities
|
Specifications |
| PFG-100 |
100 N
(22 lb)
|
Grip width ≤22 mm, Grip thickness ≤5mm (No interleaver) |
| PFG- 500 |
500 N
(112 lb)
|
Grip width ≤25 mm, Grip thickness ≤6.5mm (No interleaver) |
| PFG-1 |
1 KN
(225 lb)
|
Grip width ≤25 mm, Grip thickness ≤6.5mm (No interleaver) |
| PFG-2 |
2 KN
(450 lb)
|
Fixed jaw face: 25 x 50mm Grip width ≤9mm, can add interleaver when testing |
|
PTG Series Pneumatic Thread Grips
|
The PTG series of pneumatic thread grips is designed for testing applications of single thread and twine, and for multi-thread materials such as yarn, nylon, or other filament materials. The thread is first tightened with parallel jaws and then rolled to achieve a firm grip.
| Model |
Capacity |
Specifications |
| PTG-100 |
100 N (22lb) |
Specimen diameter ≤1mm
|
| PTG-500 |
500 N (112lb) |
Specimen diameter ≤1mm |
|
PRG Series Oneumatic Rope Grips
|
The PRG series of pneumatic rope grips is designed for testing applications of rope, wire, cable, thread and other long and flexible materials. Model PRG-2 has a capacity of 2 KN (450 lb) and grips materials with a 3 mm diameter.
|
PWG Series Pneumatic Wedge Grips
|
The PWG series of pneumatic wedge grips is designed for testing applications of metallic and non-metallic materials. The stylish design of the PWG grips combines positive reliable wedge self-lock gripping mechanism with appealing looks.
| Model |
Capacity |
Specifications |
| PWG - 5K |
5 KN (1,125 lb) |
Specimen thickness 0 - 8 mm |
| PWG - 100K |
5 KN (22,500 lb) |
Specimen thickness
Flat inserts 0 - 10 mm
10 - 21 mm
Vee inserts 4 - 9 mm
9 - 14 mm
14 - 19 mm
|
|
TG Series Textile And Geotextile Grips
|
A full line of textile and geotextile grips are available from PTS. Textile grips are available is several designs with parallel trapezoid or billowy tooth form. Other geotextile accessories such as punch fixtures are also available.
| Model |
Capacity |
Specifications |
| TG-3K |
3 KN (675lb)
|
Grip width: 75 mm
Grip thickness: 10 mm
|
| TG-5K |
5KN (1,125 lb) |
Wave shape jaw face
Grip width: 80 mm
Grip thickness: 14 mm
|
| TG-20K |
20 KN (5,000) |
Grip width: 70 mm
Grip thickness: 12 mm
|
| GTG-20K |
20 KN (5,000) |
Grip width: 200 mm
Grip thickness: 12 mm
For geotextiles
|
|
HG Series Hydraulic Grips
|
The HG series is a stylish line of hydraulic side loading grips typically used for higher capacity testing applications that require convenient hydraulic force. The HG grips are conveniently offered with power supply for turn-key operation.
|
